|John Broskie's Guide to Tube Circuit Analysis & Design|
幸运28计划软件app03 july 2012
Octal CCDA Tube Types
幸运28计划软件appthe 12sx7 is great tube and it sells for about $30 today. it was designed to work under low b+ voltages, as found in aircraft. building a relatively low-voltage octal ccda, with a b+ of 120vdc, would make a fun project. a 120vac secondary will rectify up to about 165vdc, which can then be reduced to 120vdc by the rc filters on the pcb. the big advantage that this low b+ voltage offers is that the power-supply capacitors are much greater in capacitance at a 200v voltage rating, rather than at 400v.
幸运28计划软件appthe chinese brown-base 6sn7 is fine little tube, which is why it is used in so many $5,000 tube preamps and power amplifiers. at $10 each, they are a bargain.
幸运28计划软件appa 6sn7, unlike the 12sn7, requires more b+ voltage to sing. i used a 240vac secondary, which rectified up to about 330vdc after the rectifiers, which fell to 260vdc at the tubes. since the triodes in the cdda circuit see half of the b+ voltage, each triode sees 130v from its cathode to its plate. with the 22k plate and cathode resistors that i used, the plate dissipation is only 0.75w and the idle current for each triode is a tad less than 6ma.
i used the same positive feedback arrangement that i used in my tetra sans ps and noval ccda, so the signal gain came in at +23db (or 1:14). and once again, i am hearing the same spritely sound that the noval ccda with positive feedback produced. and once again, this ccda is dead quiet.
the only thing that i don't like about the octal version is the height of the tubes, which makes placing this ccda in a 3-inch tall enclosure impossible. on the other hand, this ccda would look great with the tube protruding from the chassis. how is that possible? i have placed redundant regulator pads on the bottom of the pcb, so all the parts, save for the tube sockets, can be placed on the bottom.
幸运28计划软件appthe are available at the glassware/yahoo store now.
Kit User Guide PDFs
幸运28计划软件appe-mail from glassware customers:
High-quality, double-sided, extra thick, 2-oz traces, plated-through holes, dual sets of resistor pads and pads for two coupling capacitors. Stereo and mono, octal and 9-pin printed circuit boards available.
aikido pcbs for as little as $20.40
TCJ My-Stock DB
TCJ My-Stock DB helps you know just what you have, what it looks like, where it is, what it will be used for, and what it's worth. TCJ My-Stock DB helps you to keep track of your heap of electronic parts. More details.
Version 2 Improvements
Download or CD ROM
|cdvem.com Copyright © 1999-2012 GlassWare All Rights Reserved|